Skip to content
Flat $550 freight — anywhere in the lower 48 Piscataway, NJ Mon–Fri 8am–6pm ET sales@acornmachinery.com

20ft Container Chassis

$3,600.00

A 20ft intermodal container chassis at 23’6″ overall and 8 feet wide, with a 48-inch dock-height frame, 67,200 lb carrying capacity and 6,700 lb tare. Two axles, eight tires, sized to a 20ft ISO box exactly.

Request a callback on this unit
SKU: ACM-0143 Category:

Price shown in USD. Flat $550 freight delivery to any address in the continental United States.

Flat $550 delivery by flatbed carrier, lower 48 states.
30-day returns from the date of delivery.
Inspected before dispatch — every unit checked and photographed.
Questions on this unit? Call (712) 356-0109.

20ft Container Chassis

A chassis is what makes a marine box road legal. The frame locks to the container’s corner castings and the box itself becomes the deck, so nothing sits on top of anything and the profile stays low. This one is sized to a single 20ft ISO container: 23 feet 6 inches overall, a full 8 feet wide, nothing hanging off either end.

The weight numbers are the story

Tare is 6,700 lbs. Carrying capacity is 67,200 lbs. That spread is the point of buying a purpose-built chassis instead of putting a container on a flatbed. Every pound the trailer does not weigh is a pound of freight you can legally haul, and on a loaded 20-footer the difference decides whether a run is worth making.

Two axles, eight tires. Eight contact patches under a fully loaded box means the weight spreads properly and the trailer brakes predictably instead of hopping.

Dock height

The frame sits at 48 inches, which is standard dock level. Back it in and the container floor lines up with the warehouse floor, so a pallet jack rolls straight across. Low frame height also keeps the loaded center of gravity down, which matters on ramps and off-camber yard surfaces. The trade is ground clearance: a 48-inch chassis will scrape on a steep driveway apron that a taller trailer clears.

Container carried 20ft marine / ISO
Overall length 23′ 6″
Overall width 8′
Frame height 48″ (standard dock height)
Carrying capacity 67,200 lbs
Tare weight 6,700 lbs
Axles 2
Tires 8

Who buys one

Drayage operators and owner-operators building out a container fleet. Container dealers who deliver their own inventory. Warehouses running boxes between a yard and a rail ramp often enough that rental invoices start to look silly.

Before it goes into service

Confirm your container’s corner castings line up with the twist locks; ISO spacing is standard but a modified box is not always. Check that the locking pins turn and seat. Look at tire tread and date codes, and test brake function on both axles. Then check your tractor is rated for the combined loaded weight, because 67,200 lbs of capacity is only useful if the power unit and your registration can carry it.

Ordering

Freight is a flat $550 anywhere in the continental United States, priced in USD, US shipping only. Returns within 30 days. Inspection welcome. Acorn Machinery, 250 Wills Way, Piscataway NJ 08854. Call (712) 356-0109 or email sales@acornmachinery.com.

Reviews

There are no reviews yet.

Be the first to review “20ft Container Chassis”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top