Skip to content
Flat $550 freight — anywhere in the lower 48 Piscataway, NJ Mon–Fri 8am–6pm ET sales@acornmachinery.com

40ft Tilt Bed Trailer v2

$16,000.00

A 40-foot hydraulic tilt bed on two 10,000 lb braked axles with dual wheels. The 12-volt twin-cylinder pump drops the deck so equipment drives or winches on. Treated pine floor, 12-inch 19# I-beam frame, eight side winches.

Request a callback on this unit
SKU: ACM-0141 Category:

Price shown in USD. Flat $550 freight delivery to any address in the continental United States.

Flat $550 delivery by flatbed carrier, lower 48 states.
30-day returns from the date of delivery.
Inspected before dispatch — every unit checked and photographed.
Questions on this unit? Call (712) 356-0109.

40ft Hydraulic Tilt Bed Trailer

Loading ramps are where people get hurt and equipment gets dropped. A tilt bed removes them. The 12-volt pump drives twin cylinders, the deck goes down at the rear, you drive or winch the load on, and the hydraulics bring it back level. Forty feet of treated pine deck on two 10,000 lb axles running dual wheels with electric brakes.

Who this one is for

Contractors moving skid steers, mini excavators and attachments. Farms hauling implements. Anyone repositioning containers or heavy crated freight who does not want to book a forklift at both ends of the trip. The frame is 12-inch, 19-pound I-beam with 3-inch channel crossmembers on 16-inch centers, which is more steel than a trailer built for occasional weekend use gets.

Tie-down and deck protection

Eight 4-inch winches sit along the sides, plus a winch plate at the front for pulling dead loads aboard. Six-inch steel runners cap the outside run of boards and 2x2x1/4 angle guides edge the floor, so a tracked machine or a sliding container is riding on steel instead of chewing the pine. The bed is tapered at the back to soften the break-over as the deck touches down.

Length 40 ft
Axles (2) 10,000 lb, electric brakes, dual wheels
Frame 12″ x 19# I-beam frame and neck
Crossmembers 3″ channel on 16″ centers
Hoist 12-volt hydraulic pump, twin-cylinder tilt
Coupler 30,000 lb adjustable
Jacks (2) 12,000 lb
Deck Treated pine, tapered at rear
Deck protection 6″ steel runners, 2″x2″x1/4″ angle guides
Winches (8) 4″ side winches plus winch plate
Tires / wheels 235/80/16 (E) 10-ply, silver mod wheels
Electrical Sealed harness, LED lights, DOT reflective tape
Safety Breakaway kit with built-in charger and battery level indicator, safety chains
Finish Enamel paint

Before you hook to it

Twenty thousand pounds of axle under a 40-foot deck adds up fast once there is a machine on it. Check what your truck is actually rated to pull and register, not what it will physically move. Cycle the pump through a full tilt and return before delivery day so you know the cylinders are even and the battery holds charge. Wood decks are consumable; expect to replace boards eventually, which is the trade for a surface that grips and does not dent.

Ordering

Flat $550 freight anywhere in the continental United States, USD, US shipping only. Thirty days to return. Call (712) 356-0109 or write sales@acornmachinery.com.

Reviews

There are no reviews yet.

Be the first to review “40ft Tilt Bed Trailer v2”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top