Buy the JC100 for one reason: the high-flow circuit. Standard flow is 75 L/min (19.8 gpm), and the high-flow system delivers 140 L/min (36.9 gpm). Forestry mulchers, cold planers, large brooms and stump grinders need that second number. A standard-flow machine will turn them slowly and cook the oil trying.
Rated load is 1,100 kg (2,425 lb) with an operating weight of 3,550 kg (7,826 lb). The standard bucket holds 0.55 m3 (19.4 cu ft) and measures 74 in across, matching the machine width over the 12-16.5 tires.
Lift geometry
Maximum operating height is 4,070 mm (160.2 in) with a bucket pin height of 3,280 mm (129.1 in). Discharge height at full lift is 2,500 mm (98.4 in) with 700 mm (27.6 in) of reach out past the pivot. That is enough to load over the side of a standard dump body and most tandem hoppers. Ground clearance is 8.07 in, cab ceiling height 85 in.
Length is 113.4 in without a bucket and 140.9 in with one. Turning radius bare is 50.3 in.
A note on the spec sheet
The factory sheet supplied with this unit has two obviously garbled lines: it lists travel speed at 918 km/h and rated power at 374 kW. Those are transcription errors, and we are not going to publish numbers we cannot stand behind. Call us and we will read engine output and travel speed straight off the data plate on the machine before you commit.
| Rated load | 1,100 kg (2,425 lb) |
|---|---|
| Operating weight | 3,550 kg (7,826 lb) |
| Standard hydraulic flow | 75 L/min (19.8 gpm) |
| High flow | 140 L/min (36.9 gpm) |
| Bucket volume | 0.55 m³ (19.4 cu ft) |
| Max operating height | 4,070 mm (160.2 in) |
| Discharge height | 2,500 mm (98.4 in) |
| Vehicle width | 1,880 mm (74 in) |
| Ground clearance | 205 mm (8.07 in) |
| Tires | 12-16.5 |
| Fuel tank | 90 L (23.8 gal) |
| Stock number | ACM-28742 |
Flat $550 delivery to the continental US, 30 days from delivery to return it.
Reviews
There are no reviews yet.