Skip to content
Flat $550 freight — anywhere in the lower 48 Piscataway, NJ Mon–Fri 8am–6pm ET sales@acornmachinery.com

2024 Mission Trailers 101×24 Aluminum 4/5-Place Drive In/Out Deckover w/Galvanized Pkg, Canopy

$9,600.00

All-aluminum 101×24 deckover that hauls four to five sleds or a pair of side-by-sides. Tapered spring-assist ramps front and rear let you drive in one end and out the other. Braked galvanized torsion axles and a 76-inch interior.

Request a callback on this unit
SKU: ACM-0159 Category: Brand:

Price shown in USD. Flat $550 freight delivery to any address in the continental United States.

Flat $550 delivery by flatbed carrier, lower 48 states.
30-day returns from the date of delivery.
Inspected before dispatch — every unit checked and photographed.
Questions on this unit? Call (712) 356-0109.

2024 Mission Trailers 101×24 Aluminum 4/5-Place Drive In/Out Deckover

Four sleds, five if they are narrow, or a pair of side-by-sides with room for gear. The deckover layout carries the floor above the tires, which is where the 101-inch width comes from. No wheel wells eat into the usable floor. Clubs and families with a fleet of machines are the buyers here.

In one end and out the other

Both ends have tapered ramps with spring assist. Load from the rear, unload out the front, and nobody has to reverse a sled down a ramp in the dark. The rear opening is 91 inches wide by 72 tall, which takes wide-track sleds and most UTVs. The front measures 64 by 72. Interior height is 76 inches, so measure a tall side-by-side with its roof and light bar before assuming it clears.

Details that count on a cold morning

Two 14×14 fuel doors with paddle handles let you fill machines without unloading them. Three interior dome lights run off a wall switch, and the rear door canopy is lit. There is a roof vent to move moisture out, exterior LED lighting all around, and full-length slide tracks with sliding D-rings so tie-down points land wherever the machines do. The spare mounts inside on an elevated bracket instead of taking floor space.

How it is built

All-aluminum, with wall and roof studs on 16-inch centers and floor crossmembers on 24-inch centers under 3/4-inch decking. The 72-inch V-nose carries a 12-inch radius and an anodized nose cone, adding storage length ahead of the box and trimming a little drag. Two 3,000 lb galvanized torsion axles with brakes ride on 13-inch galvanized wheels.

GVWR 6,000 lbs
Dry weight 2,480 lbs
Payload 3,520 lbs
Box 101 in wide x 24 ft, plus 72 in V-nose
Interior height 76 in
Rear opening 91 in W x 72 in H
Front opening 64 in W x 72 in H
Axles (2) 3,000 lb galvanized torsion, braked
Wheels 13 in galvanized
Ramps Tapered front and rear, spring assist
Side door 32 in x 72 in with paddle handle
Floor 3/4 in decking, full-length slide tracks with sliding D-rings

Payload is 3,520 lbs on a 2,480 lb dry weight. Four sleds and full fuel fit inside that with margin. Four full-size side-by-sides do not, so add up actual machine weights before you commit. A 24-foot deckover is also a lot of trailer to park and a lot of sail area in a crosswind.

Freight is a flat $550 to the continental United States and returns stay open 30 days. Call (712) 356-0109 or email sales@acornmachinery.com to check current stock.

Reviews

There are no reviews yet.

Be the first to review “2024 Mission Trailers 101×24 Aluminum 4/5-Place Drive In/Out Deckover w/Galvanized Pkg, Canopy”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top