Skip to content
Flat $550 freight — anywhere in the lower 48 Piscataway, NJ Mon–Fri 8am–6pm ET sales@acornmachinery.com

2010 Merhow 3 Horse Slant Load Bumper Pull

$6,000.00

Lightly used 2010 Merhow three-horse slant load bumper pull, 17 ft long by 6 ft 9 in wide with a 7 ft interior. Extruded aluminum sides, rear ramp, first-stall escape door, insulated roof, fans and per-stall vents.

Request a callback on this unit
SKU: CON-7921 Category:

Price shown in USD. Flat $550 freight delivery to any address in the continental United States.

Flat $550 delivery by flatbed carrier, lower 48 states.
30-day returns from the date of delivery.
Inspected before dispatch — every unit checked and photographed.
Questions on this unit? Call (712) 356-0109.

Seventeen feet of trailer behind a bumper pull hitch is about the limit before most people move to a gooseneck. This 2010 Merhow sits right at that line: three stalls, a front dressing room and a rear tack, all on a bumper pull. If you have a three-quarter-ton truck and no bed hitch, this is the configuration that works.

Condition is the selling point. It has been lightly used and cared for, and it shows in the interior. Extruded aluminum sides keep the weight down without the flex you get from thin sheet over posts.

The ramp

A rear ramp was added at the factory, which is not the same as an aftermarket bolt-on. Horses that plant their feet at a step-up will usually walk a ramp without argument, and if you have ever spent forty minutes in a parking lot with a horse that will not step up, that feature pays for itself once.

Ventilation and safety

The roof is lined and insulated, with a vent over each stall and interior fans. Head-side windows drop down behind bars, hip-side windows slide. Between the four you can set airflow for a hot August haul or shut it down for a cold one. An escape door out of the first stall means you are not backing yourself out past a horse. A stud wall divider is fitted, so a stallion or a horse that needs separation can travel without contact.

Storage

Front dressing room with swing-out blanket bars. The rear tack collapses and carries bridle hooks, a brush box, a carpeted door and wall, and a removable saddle rack. Six exterior tie rings, an exterior load light and interior lighting round it out.

Layout Slant load, 3 horse, bumper pull
Dimensions 17 ft long x 6 ft 9 in wide x 7 ft tall
Sides Extruded aluminum
Loading Factory-added rear ramp
Escape door First stall
Divider Stud wall
Roof Lined and insulated, vent per stall
Airflow Interior fans, drop-down head-side windows with bars, sliding hip-side windows
Rear tack Collapsible: bridle hooks, brush box, carpeted door and wall, removable saddle rack
Dressing room Front, with swing-out blanket bars
Exterior 6 tie rings, load light

Weights and GVWR are not listed for this unit and we will not guess at them. Ask and we will pull the numbers from the VIN plate before you buy. Check the floor, tires, brakes and coupler at inspection, and make sure your truck has a working brake controller. Flat $550 freight anywhere in the continental US, 30 days to return.

Reviews

There are no reviews yet.

Be the first to review “2010 Merhow 3 Horse Slant Load Bumper Pull”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top